HFSS中旋轉拋物面天線饋源的問題
我在HFSS中建好兩個工程，一個工程中設計了喇叭天線作為饋源。并且做了仿真得到正確的場圖。另一個工程中做好了一個旋轉拋物面，現在的就是不知道如何把那個工程中的喇叭天線導入到現在這個工程中做為拋物面天線的饋源？請高手指教！
好像有種功能叫datalink的，設置incident wave作激勵然后鏈接到饋源工程就可以了
上面有提示這個錯誤！這是不行。
reflector_antenna (F:/HFSS_design/reflector_antenna/)
HFSSDesign1
[error] Since there is a near or far field incident wave, you must have at least one radiation or PML boundary set for incident or enforced fields. (9:07 下午 四月 02, 2009)
[warning] Solution Setup 'Setup1': Given the specified frequency and model dimensions, an extremely large mesh will be required to produce an accurate solution. Your model and/or frequency units may be set incorrectly. (9:07 下午 四月 02, 2009)
樓主能不能上傳呀，學習
急需學習一下
